How To Fix Leaking Kitchen Faucet?

How To Fix Leaking Kitchen Faucet

In this post, I will be discussing how to fix leaking kitchen faucet

Water is a precious resource. Once we waste it, we can never get it back. That’s why fixing a leaky kitchen faucet is such an important task to undertake when one is found. Leaks in the kitchen are common and often happen with no warning at all.

The spigot may have been dripping just a little every few minutes, but over time that wasted water can add up to hundreds or even thousands of gallons.

Even a slow drip from a faulty faucet head can waste as much as 20 gallons of water per day. That’s why we need to take care and make sure we do not go too long without fixing it.

The best way to find the source of the leak is by putting food coloring in the tank and waiting 15-minutes before checking it in another room (or outside if that’s where the water is coming from). If colors appear anywhere other than the tank itself then you know exactly where to look for your leaky faucet.

What is a leaky faucet?

The leaky faucet is a faucet that is dripping from the spout or somewhere in between the spout and the handle. In most cases, it’s not a bad idea to have your plumber come out and fix it for you if you don’t feel comfortable tackling the job yourself. Some jobs can be very complicated depending on where exactly your leaky faucet is coming from.

Is a leaky faucet bad?

A leaky faucet isn’t the worst thing in the world, but it is bad for your wallet. Over time water can rust out pipes or cause irreversible damage to your walls if you don’t catch it soon enough. If not taken care of promptly a small drip can turn into a flood very quickly.

Can I fix my own leaky faucet?

Fixing a leaking kitchen faucet yourself is definitely doable, but it’s wise to make sure you know exactly what you are doing before taking it on. A broken pipe under the sink could mean hours of work and thousands of dollars worth of damage if not done correctly.

Is there any way to test if my leaky faucet is repairable?

The best thing to do is simply replacing the worn washer or O-rings inside your faucet, but that may not fix the whole problem. If this doesn’t work there are other ways to get water out of your sink besides using a leaky faucet. Some newer homes have “air gap devices” which allow for air in between uses and prevent standing water from building up in the pipe. So if you just need to dump standing water out of your sink before doing dishes then an air gap device will definitely come in handy and save you some cash versus hiring a plumber.

What can I use instead of a new washer if my faucet is too old?

If your faucet is too old to have the proper replacement parts, then you will just have to replace the whole thing. The best way to deal with this problem in many cases is simply replacing all of the water pipes under the sink while you are at it.

When should I hire a plumber?

If you need help installing an air gap device or fixing another water pipe under your sink then you are going to need some extra help from a professional. If your leaky faucet is only dripping every few minutes and does not seem like an emergency job, then feel free to handle it yourself if you want. But for anything more complicated than that there isn’t much sense in trying to do it yourself when there are so many great plumbers out there waiting to help.

If you want to tackle fixing a leaky faucet by yourself, then go ahead and read this article all about how to do so!

How To Fix Leaking Kitchen Faucet

How To Fix Leaking Kitchen Faucet?

Here are some things to keep in mind before you undertake this job:

1) Disconnect the water supply;

First step to stop a leaky faucet is to disconnect wate supply to it. Shut-off valves under the sink are typically operated by a flat-head screwdriver or a quarter turn stopcock. Do this to both the hot and cold water lines before you do anything else.

Once you have stopped up water supply turn-off main water supply to your home. To do this go outside and locate one of the two valves at the front or side of your house. Once found turn it clockwise so it’s perpendicular with the pipe that leads into your home. This will cause a hissing sound but don’t worry – no more water can get in after being turned off completely.

2) Get rid of excess water;

Next, drain as much of the remaining water from your lines as possible by opening up both faucets . This is best done with two buckets – one for each side. You can also try to remove a U-shaped jumper hose that may be installed between the supply line to the faucet and one of your shut off valves. Last resort is to use a vacuum breaker—a device often found at any hardware store—to suck out all the water left in your system.

3) Remove the handle (two screws);

Don’t be too intimidated by this step. Remember, you have a screwdriver in your hand and it’s going to take just a few minutes to complete. After turning off the water, look for a Phillips head screw on the face of the handle—one on top and one on bottom. Use screwdriver to take out handle, then remove stem screw holding spout assembly in place with adjustable wrench or slip joint pliers (see photos below). You may need to hold back packing nut on stem with other adjustable

Remove them carefully, being mindful of any small pieces that may fall into the innards of the faucet when they come loose.

4) Take out cartridge / stem assembly;

When all screws are removed from your handles, pull them up and away from the faucet base (they will likely be attached to some wires). Next gently tap on the handle with a rubber mallet or wood block and hammer until it falls away from the faucet base.

A small screw-driver or pick will likely come in handy at this step as it is often necessary to pry apart parts near where the upper and lower stem assemblies meet (if you can’t do this, put a little clear silicone glue around the seam and press together).

5) Rebuild cartridge;

With your new cartridges in hand (most hardware stores sell them attached to faucet washers), make sure they are pushed all the way into place. This is easiest done with two hands – push one end firmly until it won’t go any further and then hold that end down while pushing on the other end (so that it doesn’t pop out of place).

If it doesn’t go right in, you may need to slightly ream out the opening of the faucet with a standard screwdriver.

6) Put everything back together;

Now that your cartridge is firmly in place, put your handle back on. Make sure all screws are tight and then reconnect the water supply lines by turning them slowly clockwise until they stop (note this connection should be snug but never overtightened – use only your fingers to turn them on).

Finally attach any other hookups (such as sprayers or soap dispensers) before testing for leaks.

If you want to be extra cautious, connect the faucet to the water supply before reattaching it to the sink.

Remember, these instructions are meant as a guide for repairing your own leaky kitchen faucet. If you prefer hiring a plumber over doing it yourself, that is your prerogative—just remember that this job should cost less than $100 if done properly.

If the leak persists, you may need to tighten up the packing nut or replace it completely. You can purchase a new one at your local hardware store and then take out the old one with pliers (wear eye protection). If none of these tips work, you’ll probably have to call in a professional; there is no way to repair a stripped screw holding the handle in place.

Remember, these instructions are meant as a guide for repairing your own leaky kitchen faucet. If you prefer hiring a plumber over doing it yourself, that is your prerogative.

References : How to Fix a Leaky Faucet

Noah Burns

I am Noah Burns- The Guy behind mybestsix.com. I love to experiment and test new products to create informative contents for readers like you. I aim to make this site a leading source of information and reviews to help consumers make more informed buying decisions.

Recent Posts